Screw Support Mount, Series DLMS (M)

Product Description

Screw Support Mounts - Series DLMS

Dynemech DLMS Series Anti Vibration Mounts having round base, developed in stainless steel allow anchor-free machinery installation.

These are available in three variants of M, RA and F.

Type M - The bolt can rotate on its axis and moves radially provides compensation of ground unevenness of up to 5° and simple levelling with a great levelling range. The levelling is done by rotating the hex provided at the base of the bolt just above the mount body. Machine base must have a tapped hole. One free nut and washer  is provided for clamping after the levelling is completed.

Type RA - The bolt can rotate on its axis and provides simple levelling with a great levelling range. The levelling is done by rotating the hex provided at the base of the bolt just above the mount body. Machine base must have a tapped hole. One free nut and washer  is provided for clamping after the levelling is completed.

Type F - The bolt is fixed with the mount body. Two free nuts and a washer is provided. MAchine base rests over the bottom nut and washer. Levelling is done by rotating the bottom nut. Machine base must have plain holes. The top nut is used for clamping after the levelling is completed.

 DLM Series are easy-to-install  , maintenance free and effective vibration dampers for machines with respective plain/tapped holes in the base. 

These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. 

High friction grip at the bottom is achieved through elastomeric anti vibration insulation sheets  so machines don’t move.

DLMS Series find applications where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, Medical Equipment Manufacturing , Chemical processing industries, Assembly Equipment and Semiconductor Processing Equipments